5TT 3-R

Type 5TT / 5TTP Slow Blow Fuse Series 5TT/5TTP Series, 5x20mm Glass/Ceramic Tube Slow Blow Fuse RoHS Compliant Description 5x20mm Slow Blow, glass / ceramic tube body cartridge fuse designed, approved and complied with UL and CSA standard 248-14. Features - Meet UL and CSA standard 248-14 Wide operating temperature range Bulk and Tape & Reel packing available Full compliance with EU Directive 2011/65/EU and amending directive 2015/863 Halogen Free Lead Free Applications Provide individual protection for components or internal circuits. - Power supplies - Battery charger - Monitor LEAD FREE = - Adapter HALOGEN FREE = Physical Specifications Body : Glass or Ceramic (see info below) Materials Cap : Nickel Plated Brass Caps Leads : Matte Tin Plated Copper On Fuse : “bel”, ”5TT”, ”Current Rating”, “Voltage Rating”, ”Appropriate Safety Logos”, ”  ”（ RoHS compliant） Marking On Label : "bel", "5TT”or”5TTP", "Current Rating", "Voltage Rating", "Interrupting Rating", "Appropriate Safety Logos" and " ", " "(China RoHS compliant). Electrical Characteristics (UL/CSA STD,248-14) Safety Agency Approvals Blow Time Testing Current Minimum 100% 4 hrs. N/A 200mA-10A 135% N/A 1 Hr. 200mA-10A 5 sec 30 sec 200mA-3A LR39772 3 sec 30 sec 3.1A-10A E20624 200% Maximum Amp Range Safety Agency Ampere Rating/ Voltage Rating Safety Agency Certificate E20624 Ampere Range / Volt @ I.R. ability* 200mA-3A/250V AC@100A 200mA-8A/125V AC@10,000A 200mA-3A/ 250V AC 3.15A-10A/ 125V AC LR39772 10A/125V AC@1,000A JET1037-31003-1010 JET1037-31003-1011 1A-5A/125V AC@500A JET1037-31003-1007 >5A-15A/125V AC@300A *I.R.= Interrupting Rating = Short Circuit Rating(Amps) Specifications subject to change without notice belfuse.com/circuit-protection Type 5TT / 5TTP 2/4 Environmental Specifications Shock Resistance MIL-STD-202G, Method 213B, Test Condition 1 (100 G's peak for 6 milliseconds; Sawtooth waveform) Vibration Resistance MIL-STD-202G, Method 201A (10-55 Hz, 0.06 inch, total excursion). Salt Spray Resistance MIL-STD-202G, Method 101E, Test Condition B (48 hrs). Insulation Resistance MIL-STD-202G, Method 302, Test Condition A (After Opening) 10,000 ohms minimum. Solderability MIL-STD-202G, Method 208H Resistance to solder Heat MIL-STD-202G, Method 210F, Test Condition B (260+/-5℃,10+/-1 sec) Thermal Shock MIL-STD-202G, Method 107G, Test Condition B (-65℃ to +125℃). Operating Temperature -55℃ to +125℃ Terminal Strength IEC-68-2-21 Electrical Specifications Typical Cold Volt-drop Resistance @100%In (ohms) (Volt) max. Maximum Melting I²T Melting I²T Power